How to measure shocks

It's a pain in the butt trying to buy shocks for a truck/suv you bought lowered. Not knowing how much the truck is dropped makes buying shocks a difficult task. This how to will also be helpful for the trucks that have air suspension or running a super low static drop.

MEASURING POINTS FOR SHOCK ABSORBERS

Measuring points differ based on the mounting style. Extended and Compressed lengths are measured:

1. From center of eyering to shoulder of stud
2. From center of eyering to center of eyering
3. From shoulder of stud to shoulder of stud

Once you have the measurements give us a call and we can help select a part number that will work. If you already know how much your truck is lowered CLICK HERE to find the part numbers you will need by Belltech.

*This is courtesy of KYB Americas website. We do not take credit for the images or text above.

How To Measure for Wheel Spacers

Another question we get often from our coilover customers is " Which wheel spacers do I need? " This is another question we tend to back away from. Here is why: There are too many different wheel combinations. By combinations I mean offset, diameter and etc.

The guys over at H & R have put together a simple HOW TO to know you are ordering the right wheel spacers.

1. Gather Tools
To properly measure your wheel gap you will need a few simple tools:

• Measuring device with millimeter units
• Straight edge--Yard stick or similar

2. Check Your Gap

• Place a straight edge flush with the face of the wheel and tire combination. Make sure the straight edge touches the tire in two spots to keep the straight edge even with the tire.
• Use the measuring device to measure from the inside of the straight edge to the inner fender lip. (see diagram)
• Make sure that the measurement is taken at the point where the wheel and tire is closest to the fender. For instance, on a car with a large amount of negative camber the tire and wheel may be closest at the front or rear edge of the fender.

Now that you have wheel spacers do not forget longer wheel bolts. Here is how to measure the bolts:

Here is a video courtesy of H&R

**Note content of this blog post is courtesy of H&R's website. We do not take credit for any of the photos,videos or text of the how to content.

How To Properly Measure Vehicle Ride Height

We often get the phone call or email saying "I don't know how much I want to lower my ride." The best way to get an idea is to measure.

Here is how to successfully do that:

1) Park your vehicle on a level surface. By doing this you ensure accurate results when getting the vehicle's ride height measurements

2) By using a measuring tape start from the center of the axle hub going straight up to the bottom of the fender lip.

3) Repeat this process for all four sides.

This is also a process we recommend BEFORE you install your lowered/lifted suspension. By having before and after measurements you can know the total actual amount of ride height you have achieved.

Now that you have figured out the ride height for your vehicle you want to know what size wheels and tires will work. We typically won't suggest a size to you unless we have personal experience with the same vehicle and suspension as you.

We do have a niffy tool from the guys over at Discount Tire to use. By using their Tire Dimensions tool you can see what tire size and rim will work. http://www.discounttire.com/dtcs/infoTireMath.dos

Ya we just gave you some homework, but hey look at it this way at least by doing the measurements we can ensure you order the right stuff the first time and will be happy with your new stance.

Photoshoot of 2013 Chevy Silverado Reg Cab

After the dust settled from SEMA and the holidays were over we finally had a chance for some photos. We enlisted the help of a local photographer and model. Special thanks to the following sponsors:

• AVS
• Budnik Wheels
• Belltech Sport Trucks
• Settin Trendz
• Fresno Unlimited
• Street Scene Equipment
• Roadwire Leather Interiors
• Wilwood Disc Brakes
• Falken Tires
• Viair Corp
• Soundstream Audio
• Spyder Auto
• Bedrug
• Leer
• TRex Grilles
• Coverking
• Airaid
• Magnaflow Exhaust
• Dynamite Car Audio Clovis
• Airlift
• Optima Batteries

Now for the photos you were waiting for......

Paint & Exterior Goodies!

Now that we have a solid suspension, brakes and engine performance we needed to make sure that the exterior followed suit. Settin Trendz in Fresno, California could not have done a better job. For the exterior a mix of Spyder Auto, Street Scene, Settin Trendz, BedRug, Bushwacker and AVS products were installed.

We dropped off the truck with Jeff at AVS for a bolt in door popper kit and alarm. Jeff installed a bolt in door popper kit (part number TBA), pre wired wiring harness, interior rocker switch and an alarm system. After Jeff was all finished up the truck went over to Settin Trendz to begin the transformation.

Settin Trendz used their own custom made filler plates for the door handles and stake pockets. Adam has designed form fitting end caps to be used with the steel Street Scene rollapn. (Street Scene Part# 950-71128)

After a few days in the hands of Settin Trendz we ended up with this

Here you will find more details of the parts used to achieve this simple and clean look

BedRug Part #BRC07SBK

Bushwacker Tailgate Cap Part #48516

Street Scene Steel Rollpan Part#950-71128

Street Scene Tailgate Handler Relocator Part#950-61131

Spyder Auto Tail Lights Part#5001795

Street Scene Electric Mirrors Part#  950-11960

Street Scene Steel Cowl Hood Part# 950-71129

Street Scene Billet Grille Upper Part# 950-80176

Street Scene Billet Grille Bumper Part# 950-80177

Spyder Auto Headlights Part# 5033871

Budnik Billet 22" Tungsten 6 Wheels

Roadwire Interior & Sound Stream Audio

When you drive a lot you want a comfortable interior and some jams. Roadwire was the first company to come to mind when discussing converting our cloth seats over to leather & suede. We decided to go with a Black Leather base with black suede insert topped off with red stitching. After a few hours at Fresno Unlimited for installation we ended up with a perfect result. Note: We didn't use the headrests because we thought it looked bitchin' without.

As you know we bought a WORK TRUCK edition of the Regular Cab Silverado. We couldn't add a Roadwire kit without swapping the vinyl mat to a custom made carpet kit by Fresno Unlimited.

Now on the the tunes. After using Pioneer headunits in the past we picked up a Navigation Touch Screen Pioneer headunit. I picked up a PAC GM29 module to maintain all the factory chimes off eBay for about $25 and a Metra install/wiring harness kit for $20.

Chris and his guys over at Dynamite Car Audio in Clovis, CA were ready to get their hands on the truck to install the goodies we received from Sound Stream. Sound Stream sent us over a 10" subwoofer from their Picasso line.(Part# PCO.10). To power their subwoofer we received a 640 watt amp. (Part #PN5.640D). To finish off the sound system we used a Sound Stream components kit and speakers. Dynamite Car Audio finished off the simple and clean interior by wrapping a custom made speaker box in matching black suede.

Stay tuned for more on the SEMA build!

Belltech Suspension and Wilwood Brakes

I have to admit this is the week I have been waiting for since I sprained my ankle getting out of the truck. Ya it's okay you can laugh.

Our truck features a Belltech complete 5/8 lowering kit, Wilwood braking system, Airlift helper bags with a WirelessOne system finished up with a Viair air management system.

Here is the list of components from Belltech we used to get the 5/8 drop.

• 2" Drop Spindles Part# 2511
• 2" Lowering Springs Part#12464
• Camber Bushings & Cam Plates Part#4957
• Lowering Struts Part#25003
• Front 1 3/8" Diameter Sway Bar Part#5407
• 7" Flip Kit Part#6522
• 1" Shackle Part#6700
• C-Notch Kit Part#TBA

Belltech's new 2" drop spindle Part#2511 (More info coming soon!)

Bigger sway bar Part#5407

Belltech kept it classic with their notch design for this truck. More info coming soon!

Stopping power is always a huge plus. The rear of our truck came with a drum. Luckily the guy's over at Wilwood had a solution to get us running a 6 piston front and 4 piston rear system. To achieve the 4 piston rear system we had to purchase GM Part# 19178787 (x2) and GM Part# 15012506 (x4).

GM Part# 19178787 (x2)

GM Part# 15012506 (x4)

Front Completed

Rear Completed

Here is a before and after of our truck.

Stay tuned for the Airlift Helper Bag and Viair Air Management install....